Quickly and easily configure HP Procurve ip authorized-managers IPv4

Aruba access improved GUI

hp procurve ip authorized-managers
Configuring HP Procurve ip authorized-managers
  • Login to the switch with manager access
  • Open the navigation menu to the left and select Security, IP Authorization
  • Under IP Authorization Management click the + button to open the add new IP Address window
  • Select the IP Type required, in this guide IPV4
Aruba access improved GUI
Configuring HP Procurve ip authorized-managers
  • Enter the IP Address of the machine you wish to have access
  • Enter the Mask as 255.255.255.255 or if you wish to give a range of machines access enter for example 255.255.255.250 to give 5 machines on the range access
Aruba access improved GUI
Configuring HP Procurve ip authorized-managers
  • Select the desired access method
  • Select the Access level for the specified machine(s)
  • Click Save
  • Only machines now specified in the previous steps will have access to the switch

Aruba traditional GUI

Aruba traditional GUI
Configuring HP Procurve ip authorized-managers
  • Login to the switch with manager access
  • Open the navigation menu to the left and select Security, IP Authorization
  • Click Add Address
  • Enter the IP Address of the machine you wish to have access
  • Enter the Mask as 255.255.255.255 or if you wish to give a range of machines access enter for example 255.255.255.250 to give 5 machines on the range access
  • Select the desired access method
  • Select the Access level for the specified machine(s)
  • Click Save
  • Only machines now specified in the previous steps will have access to the switch

HP ProCurve Java GUI

Java Security
Add the IP Address of the switch to the Java configuration GUI by searching for Java from your start menu and selecting Configure Java
Select the Security Tab and Click Edit Site List
2020 04 30 17 09 48 Edit Post ‹ The ICT Guy — WordPress Work Microsoft​ Edge
Click add and enter the IP address of the switch into the additional box that appears on the list, Click OK
Java Securtiy
Click Continue to add the switch IP Address to the Java allowed list
2020 04 30 14 23 10 CCHS RDWEB TeamViewer2
Configuring HP Procurve ip authorized-managers
  • Login to the switch with manager access via Internet Explorer
  • On the navigation bar along the top select Security and Authorized Addresses
  • Enter the IP Address of the machine you wish to have access
  • Enter the Mask as 255.255.255.255 or if you wish to give a range of machines access enter for example 255.255.255.250 to give 5 machines on the range access
  • Select the Access level for the specified machine(s)
  • Click Add
  • Only machines now specified in the previous steps will have access to the switch

HP Web Management Platform GUI

HP Web Management Platform GUI
Configuring HP Procurve ip authorized-managers
  • Login to the switch with manager access via Internet Explorer
  • On the navigation bar along the top select Security and Authorized IP
  • Note that there are currently no entries
HP Web Management Platform GUI
Creating an ACL IPV4
  • Click on QOS
  • Click ACL IPV4
  • Click Create
  • Enter the ACL number 2001 (Basic ACL entries can be any number from 200 – 2999)
  • Leave the Match Order as Config
  • Click Apply
  • You now have an ACL ready to put your IP Addresses in
HP Web Management Platform GUI
Adding IPV4 Addresses to the ACL
  • Click on QOS
  • Click ACL IPV4
  • Click Basic Setup
  • Select the previously created 2001 ACL from the drop down menu
  • Tick Source IP Address and enter the IP Address of the client you wish to give access to
  • Enter the Source Wildcard as 255.255.255.255 or if you wish to give a range of machines access enter for example 255.255.255.250 to give 5 machines on the range access
  • Click Add
HP Web Management Platform GUI
You will now see that the IP Addresses you have entered show in the list below
HP Web Management Platform GUI
Configuring HP Procurve ip authorized-managers
  • Click on QOS
  • Click ACL IPV4
  • Click Setup
  • Under Telnet and Web (HTTP) IPv4 ACL select from the dropdown the 2001 ACL previously created
  • Click Apply
HP Web Management Platform GUI
Configuring HP Procurve ip authorized-managers
  • You can now see that the IPv4 ACL entries are present. The switch will now deny access to any device trying to connect to the management GUI other than the ones specified in the ACL

Further reading can be found in the HP Aruba website

If you found this article helpful, would you consider buying me a Coffee?